A custom hole opener is an effective way of enlarging holes.
Our rock reamer can be custom built depending on your pullback power and the diameter of the pipe. A wide selection of cutters are available to allow drilling in conditions from soft rock right through to the hardest granite.
- All cutters are Sealed bearing / IADC CODE 400-700 cutters
- TCI or Mill Tooth Cones Made from a solid shaft
- Available with shafts from 8.25cm to 16.5cm
- Available with threads from 2-3/8" API REG to 6-5/8" API REG (including IF, Full Hole, X Hole and API REG threads)
- Fluid chamber - internal gusseted and welded inside and out
- Available with both BOX x PIN and BOX x Pulling EYE design
- Front stabilizers
- Various jetting designs
- Reamer compactors